Facebook Pixel

Cursos Técnicos - Ingenieros

View as List Grid

Items 1-10 of 82

Page
por página
Set Descending Direction
  1. 3T - Introducción a la Ingeniería Farmacéutica: Procesos de Manufactura de Dosis Sólidas
    $50.00

    Introducción a la Ingeniería Farmacéutica: Procesos de Manufactura de Dosis Sólidas tiene el objetivo de proporcionar al participante una visión general de los procesos de manufactura de productos farmacéuticos de dosificación sólida en la industria farmacéutica. Los productos de dosificación sólida son la mayoría de los productos farmacéuticos hoy en día. Múltiples operaciones unitarias tales como: granulación, fresado, mezcla, secado, compresión, llenado de cápsulas y recubrimiento, son necesarias en la fabricación de estos productos. Es importante tener conocimiento y ser capaz de identificar los parámetros Critical  Process  (CPP) de cada unidad de operaciones y su impacto en la calidad del medicamento final.

    Learn More
  2. 3T - Introducción a la Ingeniería Farmacéutica: Procesos de Formulación de Dosis Sólidas
    $50.00

    Introducción a la Ingeniería Farmacéutica: Procesos de Formulación de Dosis Sólidas tiene como objetivo proporcionar al participante con una visión general de la formulación farmacéutica de un medicamento de dosificación sólida.  Los productos de dosificación sólida son la mayoría de los productos farmacéuticos hoy en día. Múltiples ingredientes (drogas activas, rellenos, desintegrantes, tensioactivos, lubricantes, glidantes, recubrimientos y cápsulas) se incluyen en la formulación del medicamento de dosificación sólida. Es importante tener conocimiento y ser capaz de identificar los parámetros de material critico (CMAs)  de cada uno de estos  ingredientes y su impacto en  la función y la calidad del producto farmacéutico final.  Las CMA’s para los ingredientes principales del producto de dosis sólidas se definen en este entrenamiento.

    Learn More
  3. 6T - AC Motor Protection
    $90.00

    There is a wide range of AC motors since they can be used in numerous applications. AC motors need to be protected but protection selection usually does not depend on the motor and load type. This selection is based on the fundamental AC motor operation processes. There are crucial differences between the protection of induction motors and synchronous motors. Motor operation characteristics have to be particularly considered when applying selected protection. This approach is more important for the motors than for any other power system element.

    For example, the starting and stalling currents/times have to be known and taken into account when using overload protection. Also the thermal withstand of the AC motor has to be precisely defined under balanced and unbalanced loading conditions. The conditions for which AC motor protection is needed can be separated into two main groups: imposed external conditions and internal short circuits.

    This course is suitable for electrical engineers with a desire to understand the fundamentals of AC motor protection. Presented details cover issues related to protection against external and internal motor faults. Upon successful completion engineers will be able to address AC motor protection terminology and concepts and techniques that are used for overload, single phasing, under-voltages, unbalanced supply and reverse phase sequence faults.

    Learn More
  4. 4T-Grounding System Theory and Practice
    $60.00

    Description:

    Grounding System Theory and Practice provides an introduction to grounding system design. Underground-fault conditions, the flow of current will result in voltage gradients within and around the substation, not only between structures and nearby earth, but also along the ground surface. In a properly designed system, this gradient should not exceed the limits that can be tolerated by the human body. 

    The purpose of a ground mat study is to provide for the safety and well-being of anyone that can be exposed to the potential differences that can exist in a station during a severe fault. The general requirements for industrial power system grounding are similar to those of utility systems under similar service conditions. The differences arise from the specific requirements of the manufacturing or process operations.  

    This course is suitable for electrical engineers with a desire to understand the fundamentals of grounding practices and safety issues related to grounding design. Upon successful completion, engineers will be able to address various grounding problems, understand how grounding systems are modelled and how step and touch voltages are calculated.  

    Learn More
  5. 3T-Unit Protection of Feeders
    $50.00

    The graded overcurrent protection design, though quite simple, do not meet all the protection demands of an electrical power system. Application issues are experienced for two reasons: firstly, acceptable grading cannot be accomplished for a complex electrical system, and secondly, the protection adjustments may lead to maximum operating times that are excessive and cannot stop faults. 

    These issues are directed to the unit protection concept. This concept means that parts of the electrical system are separately protected without reference to other parts of the electrical system. One unit protection concept is widely known as ‘Differential Protection’. Foundation of this principle is to detect the difference in currents between the incoming and outgoing terminals of the protected element. Other unit protection concepts can be based on directional comparison, distance tele-protection arrangements or phase comparison unit protection. 

    This course is suitable for electrical engineers with a desire to understand the fundamentals of feeder unit protection. Presented details cover basic unit protection concepts and their particular applications to high voltage feeders. Upon successful completion engineers will be able to address basic feeder unit protection terminology, concepts, applications and arrangements.  

    Learn More
  6. 3T-Industrial System Protection
    $50.00

    Description:

    Development of industrial and commercial electrical power systems has also introduced the requirements for their improved reliability. The possible outage time costs have also dramatically increased. The introduction of automation systems into industry and commerce requires application of advanced power system automation in order to enhance overall reliability and efficiency. Careful attention has to be given to the protection and control of industrial electrical supply systems.  

    Many technologies that have been developed for EHV electrical systems may be used in lower voltage systems but usually on a reduced scale. Nevertheless, industrial electrical systems have many particular issues that need special attention and the development of custom solutions. 

    This course is suitable for electrical engineers with a desire to understand protection fundamentals that are applicable to industrial systems. Presented details cover protection of different equipment such as motors, feeders and transformers. Description of MCBs, MCCBs, fuses, different circuit breaker technologies and relays is also provided. Upon successful completion engineers will be able to address industrial system protection basics is terms of available protection technologies, methods, protection arrangements and their application to typical design configurations. 

    Learn More
  7. 3T - Arc Flash Basics and Hazard Planning Program
    $50.00

    This course gives an overview of arc flash hazards and concisely reports the different causes, nature, findings, directions and processes related with arc flash hazards. In order to address the hazard, it is first required to formulate an understanding of the process.


    Learn More
  8. 3T - Principles of HVDC Transmission
    $50.00

    The question that is frequently discussed is: “Why does anyone want to use D.C. transmission?” One reply is that electric losses are lower, but this is not true. Amount of losses is determined by the rating and size of chosen conductors. Both D.C. and A.C. conductors, either as transmission circuits or submarine cables can generate lower power losses but at increased cost since the bigger cross-sectional conductors will typically lead to lower power losses but will unfortunately cost more.


    Contact Hours: 3 Hours - Technical

    Learn More
  9. 3T - Gas Insulated Substation Definitions and Basics
    $50.00

    When determining between AIS or GIS technology, some elements alone, for example aesthetics, may be an overcoming impact on a user’s conclusion. Nevertheless, most of the time the best conclusion asks for assessing many elements and soliciting input data from many sections within an investor’s organization. It is also critical to note that the optimal substation arrangement may not be solely AIS or GIS. Sometimes a mix of the two (i.e., hybrid or mixed-technology) might be the best arrangement. Typically, most of the factors will prefer GIS technology, but it is the value or importance given to the considerations that decides if the return on investment is justifiable to choose GIS over AIS technology. Consideration that can be measured should be assigned importance weights based on the user’s needs.


    Contact Hours: 3 Hours - Technical

    Learn More
  10. 2T - Power System Transient Stability Study Fundamentals
    $30.00

    The ability of a power system, containing two or more synchronous machines, to continue to operate after a change occurs on the system is a measure of its stability. The stability problem takes two forms: steady-state and transient.


    Contact Hours: 2 Hours - Technical

    Learn More
View as List Grid

Items 1-10 of 82

Page
por página
Set Descending Direction